Skip to main content

Broken Ends

Before I start with the main body of this post, I thought I'd share this.

Don't you just hate the way selvedge threads are always breaking because you don't use a temple because they leave nasty holes in the cloth, are a pain to move and anyway, whatever?

This obviously doesn't apply to those blessed by the rolling temple, you lucky people you.

Anyway, check it out. It's an elastane yarn that's been twisted with 2 plys of worsted, to make a 2/48Nm yarn with a composition of 97/3 worsted/elastane.

The worsted has been competely worn away by the reed, yet the elastane filament holds out. Cool huh?

Now check out these awkward guys here.

The way this cloth is constructed is that there are 4 main blocks. The black is woven on the first 4 shafts, to make a 2/2 twill, and the colours are woven on 3 seperate 6 shaft blocks. the whites are on 5-10, the lights on 11-16 and the darks on 17-22. The back two shafts have some spare heddles for in case I felt like putting in a floating selvedge.

What's happening is that I am losing a lot of ends, more even than I'd expect to use from an awkward sod of a yarn like 2/32's worsted, which has never treated me with the greatest kindness, if truth be told.

But not throughout the cloth in total, just on the back sections. Which would lead one to think there was something wrong with the elevation of those shafts perhaps, or the heddles I put on them.

Except that it's only happening in the blue and the pink. Which would suggest that the yarn is weak.

But then why does it keep happening when I repair the ends with a different spool?

I just don't know, I really don't.


See that? That's how things should look. I've not broken a single end in any section except the deep pink and dark blue. Maddening.

Like I say, I suspect I have a couple of rubbish cones in there. Maybe they were sitting up there in the boxes for so long they've totally dried out and gone brittle, it happens apparently.

Comments

Unknown said…
A possible reason: because of the dying process dark yarns tend to break more easily.
Anonymous said…
Oh my, that looks like a headache and a half. Maybe those dyes are a bit more brutal on the yarn than the lighter ones and it doesn't have as long a shelf life? I'm liking the stripes, though.
Andrew Kieran said…
I see you are in consensus here. I don't know why I didn't think of that. I remember weaving something that was mostly black in the 2/36 worsted a few years ago, and I was having plenty of problems and my teacher explained that it was probably because the dye lab tended to turn any bodged dye job into black, so it had been dyed twice.

I suspect a comibnation of factors, not least of which is that the yarn's been sitting around for ages. Because I've woven with new yarn and it almost never gives me any problems. For instance the 2/60's cotton which is incredibly fine but doesn't bother me at all
"tooting" myself here (but the fact that I inherited the trick should make it better?): here is how I mend a warp...
(YMMV, but I was oh-so-happy with this method when I wove horsehair yardage doem years ago...)
Andrew Kieran said…
Cheers Kirsten :-)

You get bonus Karma Points and a placement on my "people I learn from" page, I have no idea why you're not there already.

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif