Skip to main content

Loom Building

I have undertaken to build a folding Jack loom in order that my One True Love may have something to weave on.

I shall publish them on the blog and link to them here as they're published.

Building a jack loom Part 1: Vague plans and messy diagrams

Comments

John said…
I have started building a table top loom but haven't returned to the project. The basic frame is complete but the castle and moving parts need to be started. I'll get back into the project soon.

The project was put on hold while I finished compiling a portfolio of tartan designs so weavers could have new patterns to weave. Now that Tartan Designs for Weavers is available online globally I can return to my loom building project. I'll post photos to my blog soon. Take care.
15 January 2014 at 09:55
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the ...
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif...
2 comments
Read more

Hochdorf Two Hole Tablet Weaving

So, I saw a picture of a Hochdorf band woven by a member of the Historic Tablet Weaving group on Facebook. It looks like you can get more detailed patterning with this technique and you also get a nice sort of pebbled effect in the background weave. Anyway, so I googled it and found this webpage  The Warp Factor , with a nice explanation of how to weave this band and a good diagram to go with it that tells you exactly when and where to turn the cards. Nice stuff. This is my second attempt at Hochdorf patterning. First was in acrylic to work out the technique and the use of the board. Second in 2/60's silk, to make something extra special nice. This is my new weaving board. It's a bit scrappy but it does the job. there's a few wee annoying problems with it, but the next one will be better. This is how tension is maintained on the band, with a nice even consistency. The main part of the band is held as one with a bag full of weights. The selvedge table...
1 comment
Read more