Lots of broken ends. Like, more than 40 in the first 5" of weaving. And mostly clustered in particular places, indicating that this is due to rough heddles or reed. I've not given up on 60's silk, but I won't spend any more college time on it as these looms aren't up to it.
First in a series of screw tests. I'm designing a 3D printed loom and am documenting the design process. I have already come up with the preliminary shape of the thing, but shall keep that under wraps until I'm ready to launch. I am currently attempting to make a 3D printed screw for operating the hinge. Currently the loom is designed with a 20mm wide screw and screw hole so I am working from this for the time being. The parameters I shall initially be varying are the thread size and the clearance (push). I have had good results printing a slot-together joint with a push of 0.125 so shall start from there. Standard dimensions will remain the same throughout all variations of 1.x, specific dimensions will be changed according to the results. Print setting will most likely stay the same, at least until I start narrowing down on Specific Parameters and feel perhaps the printing quality needs to be improved. Standard dimensions thread size 20 x 20mm Spec...
Comments