Skip to main content

My new toy

2 shaft Dryad Rug/Tapestry loom. Bought in the 70's, never used, stored in a garage for 30-odd years then sold to me today with the demonstration warp still on. Cleaned up and ready to go. The bearer doesn't slide, but I doubt it ever did. Anyone got any experience with these? I'm going to put up a post on weavolution later, see if anyone knows how to get this bearer moving smoothly



Comments

Post a Comment

Popular posts from this blog

Screw print 1.1

First in a series of screw tests. I'm designing a 3D printed loom and am documenting the design process. I have already come up with the preliminary shape of the thing, but shall keep that under wraps until I'm ready to launch. I am currently attempting to make a 3D printed screw for operating the hinge. Currently the loom is designed with a 20mm wide screw and screw hole so I am working from this for the time being. The parameters I shall initially be varying are the thread size and the clearance (push). I have had good results printing a slot-together joint with a push of 0.125 so shall start from there. Standard dimensions will remain the same throughout all variations of 1.x, specific dimensions will be changed according to the results. Print setting will most likely stay the same, at least until I start narrowing down on Specific Parameters and feel perhaps the printing quality needs to be improved. Standard dimensions thread size 20 x 20mm Spec...
Post a Comment
Read more

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the ...
4 comments
Read more

3D printed folding loom Version 1

Hey there! Been wanting to talk about this for aaaaaaaages. But by god does designing medium scale 3D printed objects take a long time. Anyhow, I've been designing this thing since maybe August and been printing since late October. Here's a couple of pictures of it open. I'm just freehanding that pattern. I kind of fluffed up the last two switchovers. And it was meant to be a knotwork but it clearly isn't. I really need to learn to draft things out before weaving them, I'm not good enough at sketching. Same thing on paper actually, I can draw stuff in front of me (to an extent) but I can't sketch from my head. Anyhow, here's a couple of pictures of the thing closed up. Boom! So, that's nice. I'm quite happy with the progress so far. Now, onto the issues. The big circles that form the hinge get in the way of my hands when i'm weaving and I'm always bumping my knuckles off them. Would probably work better for rigi...
Post a Comment
Read more