So delicious and sugary. Sadly this warp was rather slack down the side. Rubbish.
First in a series of screw tests. I'm designing a 3D printed loom and am documenting the design process. I have already come up with the preliminary shape of the thing, but shall keep that under wraps until I'm ready to launch. I am currently attempting to make a 3D printed screw for operating the hinge. Currently the loom is designed with a 20mm wide screw and screw hole so I am working from this for the time being. The parameters I shall initially be varying are the thread size and the clearance (push). I have had good results printing a slot-together joint with a push of 0.125 so shall start from there. Standard dimensions will remain the same throughout all variations of 1.x, specific dimensions will be changed according to the results. Print setting will most likely stay the same, at least until I start narrowing down on Specific Parameters and feel perhaps the printing quality needs to be improved. Standard dimensions thread size 20 x 20mm Spec...
Comments
There is always loom weights.
Looks like you've been busy lately :). Just wondering if you (or anyone you know - college etc) have any use for a knitting machine? I got one from a friend of a friend, but honestly it's not something I'm really going to use (or have space for). Still boxed and never been used. Let me know!
(Happy 30th btw!)
Carrie xx
Looks like you've been busy lately :). Just wondering if you (or anyone you know - college etc) have any use for a knitting machine? I got one from a friend of a friend, but honestly it's not something I'm really going to use (or have space for). Still boxed and never been used. Let me know!
(Happy 30th btw!)
Carrie xx
Carrie: I'll see if i can get a look at it before christmas. It won't be any use to me, but i could sell it for you if you want, i'm sure someone will want it sooner or later down here. What make is it?
I'll see if I can get hold of your number and give you a call ( i know i'm always saying that) and thanks for reminding me of my age, it's sure been a while since we were running about in the car park on clyde street making itching powder out of rosehips
I'm not sure of the make (it's still in a box in the boot of my car, I haven't opened it yet). I'll have a look tomorrow and let you know :)
Carrie xx