Skip to main content

I'm in

That's it. I got an unconditional offer today.

hooray!

[ trumpets, sirens sound, crowds cheer with wild abandon ]

well, that's me all cheered up, despite my sprained neck which has had me in a bad mood all morning.

so now i've got 5 months of college left to find something to do with. I could just go and sign on the dole, but that would inevitably lead to waking up in the evening and not getting any weaving done. it's funny isn't it, that when you have all the time in the world it's impossible to get anything done. I guess if the vehicles already moving it doesn't cost much to do an extra 20 miles at the end of the day, or something.

I have a table frame in the class room that i can use as a frame loom if i want, so i can either make a tapestry, a knotted pile rug or just work on tablet-woven brocade and double-face effects. If i wanted to be really ambitious i could buy the late Mr Collingwood's Ply-Split book, or the one on Sprang (whatever that is) and do a bit of that.

What would you do in my situation? I am leaving a poll on this page. I'm going to stick it on the right hand side so it'll outlive this post

-hb exits to wild applause

ps. the sectional warping is getting easier, now that i've added thread guides. I've also pulled the spool rack more towards the back of the loom, so i can get in behind it to change spools. I got 3 sections done last night, and i expect to finish beaming the warp tonight. If all goes well i shall thread and sley the reed on thursday. I then have to make a warp for friday because i'm going over to Wick High School to show an art teacher how to warp his Weavemaster table loom, which is a bigger version of the one i've got at home. That should be fun, i've never taught loomy before

Comments

Anonymous said…
YAY!!!

It's an advantage of knotted pile rug making that you can pick your nose at the same time, but I had to go with tablet weaving because that's what I would do.
Anonymous said…
Oh, and how neat to be able to help someone get their loom going!
Anonymous said…
I wouldn't do tablet-weaving - I don't like being tied to the furniture... Knotted pile or tapestry I reckon. And CONGRATULATIONS!
Andrew Kieran said…
there's no need to be tied to a chair, you can stretch your warp along a plank as long as you've got a block or a book or something to keep it raised off the wood. also, you can stretch it on a tapestry frame and have a go when you're bored of your regular task.

i just went and ordered a whole bunch of New Fez rug wool and backing canvas from texere.co.uk for messing about with knotted pile, so i'm quite looking forward to that.

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif