Skip to main content

Warp Pile suppositions, and what I did, not on my holidays but when I was working like a driven thing and not getting much rest

I spent a long time trying to figure out in my head how warp pile cloth was constructed. I knew that there were two warps, one for the ground fabric, and the second for the pile. This can be seen by pulling on a single loop in a towel. Eventually I came to a kind of idea of how this kind of fabric was woven.

It turns out I was correct. I couldn't think of any other way it could be done.

"To produce the pile a wire is inserted across the width of the warp into a shed formed only by the pile ends. When the pile ends are subsequently dropped into the bottom shed and interlaced with the weft they remain draped over the wires as shown at ..... (snip) ... Thus, the cross-sectional dimensions of the wire determine the height of the pile. After the insertion of a number of picks (and wires) the wire furthest away from the cloth fell is withdrawn leaving the loops which were formed over its shank as a surface feature in the cloth..."
     - Watson, "Advanced Textile Design: Compound Woven Structures" 4th Ed, p 287

Well, that's one way of making a warp pile anyway. One which I have the technology available to make use of. I'm sure I can find a few reasonably straight bits of wire in a scrapheap somewhere.

In other news, I am 17 hours away from my deadline for this semester and completely relaxed, having just watched Amir Khan lose a fight to Lamont Peterson with something of a lack of dignity. Nothing like losing a fight and blaming the referee. Classy.

I have yet to do:

Put my sketchbook together
Put my journal together (it's all over the place, and here as well)
Put my research file together, including retroactively making copies of many of the pages in the books I have been reading to inform me on classical men's style. The blogs I'll give up on, they're too transitory.
 Complete some small writing tasks
Label everything for the colour through practice project

Which consists of

6 pages of development samples (about 48 colour samples and 3 silk samples)
14 Final samples (all doublecloth in varying colour combinations and twill combinations)
6 Experimental samples (resleyed the doublecloth warp for single cloth and wove with both double and single-cloth in the same fabric)
3 books of collage colour combinations
1 sketchbook culled from 3 locations
1 journal culled from my main journal I used during the summer, my notebook in which I write down my random notes and do all my sums and this here blog
1 research file which is almost nonexistent right now
1 customer profile which is completely nonexistent

And for the Techniques module, which doesn't have as much. It consisted of a series of tests in which we were given a description of a fabric, ie

tight-warp stitched doublecloth with both faces in 2/2 twill and the front face in 2/30's cotton and the back face in 2/12's cotton

Then you figure out the weave plan, sleying, draft and peg plan

Also we had one test to do on calculating setts using various setting theorists. All of which seem to base their calculations on a number which is simply given to you without telling you how this number is calculated. For instance in Ashenhurst, to work out the Yarn value, you need the value for K. What is K? in the instance of cotton, K = 0.92 (if i remember correctly)

How is this derived? If i do not know how a variable in an equation is derived I cannot have any faith in the equation. This is a number that could have been (and probably was, knowing this bloody industry) derived at over 100 years ago, in which time manufacturing techniques, production standards and fabric qualities have all changed (not a lot, but somewhat). So is that the correct value? Who knows? Not I. At the end of the day half of my mind still runs along the method of "look at the yarn, screw your eyes up, say 'ooooh, 32? 36? call it 34epi'"

Hardly scientific. And they all have these problem it seems. One variable which is a mystery number whose origin is unknown.

There may be an answer to this question. I intend to find out. This is an industry that seems bereft of simple standardisation. I see no benefit to using multiple counting systems for different fibres. I see no benefit to using imperial units (yes, I still think in inches and feet, I'm trying to train myself out of it)

Anyway, where was I before I started frothing at the mouth?

Ah yes

Aside from that I have to produce two double cloths (not an issue, I just took the 2 worst looking samples from the Final warp that happened to be technically sound) and two figuring cloths (which were both crap)

And then I have to label everything.

Agh.

After this I have about 10 glorious days of doing whatever I like. My options are

1: Weaving rugs on my brand new but rather old Dryad Upright Loom. I have a whole rake of Axminster Rug Wool I foolishly purchased when I thought I was rich
2: Weave Cashmere scarves, taking the oppurtunity to learn about the use of doup-wires to weave multiple scarves on a width seperated while keeping the edges tight
3: Attempt to weave warp pile through the wire technique outlined above, as I happen to have a rather substantial warp just sitting there due to my not having the time to weave it (deep, deep shame) and it's very colourful and pretty too and it's make a lovely thing
4: Spend time with the nice people I like to spend time with, who make me happy
5: Do bugger all

I reckon I can easily find time for the last 2, but I can only do one of those weaving tasks, because I'm not completely bloody mental

Oh, and I have to tidy up around my loom.

Y'all can vote on which weaving task I do. I may very well ignore you. I'm already inclined toward warp pile as I have an idea in my head of how gorgeous it'll be (viscose feels niiiiiice) but I could be swayed towards cashmere or woollen rugs.

Andrew

Comments

Dorothy said…
I keep meaning to turn my rather large stash of rug yarn into useful rugs. However, I'd vote for 2, the technical experiment with potential to speed up scarf production. Enjoy your 10 days!
Andrew Kieran said…
well, i'm afraid sanity prevails in this case. the weave technician has found a bunch of doup chains, but he's away now till the new year. Also, there's no way I can warp up in a few days and get any meaningful weaving done. I do have myself a quarter of the way through the second rug on my current warp though, so i'm going to batter on with that.

I miiiiiiiight find myself the time to make a scarf from the warp i was previously working on though. we'll see
Andrew Kieran said…
i'll definitely be trying warp pile and douping in january though. maybe both at once, just to be awkward

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif