Skip to main content

Samples for December 2011














Comments

Meg said…
Funny how perspectives change. If I wove these, I'd worry about the warped lines caused by different shrinkage, (?) but since I didn't weave them, I think that is so attractive. I love the second from the top sample.
Andrew Kieran said…
Oh, It's not shrinkage that's causing that, all yarns used in the samples are Viscose Rayon. What you have there is the result of weaving sections of double cloth in a warp that's sett for single. The sections that are in two colours are single and are as such pushing into the sections that are double cloth which conseqeuntly have 2 layers at half sett. That's actually one of my best pieces and entirely the result of experimentation. The colours dont come out well though
Meg said…
Oh, fascinating. Of course. Intriguing idea, too.
Trapunto said…
Fantastic! You must be so proud! I like the ones with the curves too, but these all glow so beautifully. The more I look, the more I think the 5th up from the bottom would be the one I'd grab for myself if it were a big yardage. Those reds veiled by the light blue, a lot of depth.

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif