Skip to main content

end of year exhibition

i got bored when i was in the country. this is what i did for the 3D sculpture part of visual studies

the front piece is a warp of plastic fishing line, which is tough enough to handle a weft of bramble and gorse stalks. for those not familiar with gorse, it's prickly as hell and almost impossible to weave with. you really need a shed about 20 cm deep to expect to not be snagging warp threads while using it. the warp was a chaotic mess by the time i'd finished using the gorse, the brambles were very little trouble on the other hand

and this is a flower, think i had a picture up of this in unpainted state a while back. as you can see it's made out of gardening wire and masking tape




the tutors thought the straw hanging all over it was intentional, something to do with the interface between nature and artifice. the truth is i ripped the wire out of a tangle of weeds.

the suit is sort of an idea i had for aggressive textiles. textiles that harm rather than heal, y'know. the next thing i'm wanting to work with is razor wire, but it's quite expensive (about £44 for a 10 metre roll, and i think you might need a special license), so i might settle for barbed wire for the time being. it's completely frivolous of course, and has no practical applications. it occured to me you could wear sharp stuff to demonstrations and the police wouldn't be able to grab a hold of you, but then you'd hurt innocent passers-by and fellow protestors, rather self-defeating. fetish-wierdos might go for it, but i don't want to get into that market

just a bit of fun really. surprisingly enough you can actually run in that suit.

Comments

Meg said…
You CAN run in it? Yes, it is surprising! What next for you - what are your summer plans and where are you going to do it in?
Andrew Kieran said…
sadly enough i'm just looking for work. in thurso, of all places

what a sorry state of affairs eh? gotta go back round the hotels again, competing for KP work with bloody children
Trapunto said…
The outline reminds me a bit of samurai armor. I really like the way the petal shapes look, painted.
Razor wire? Aggressive textiles. Edgy ideas, and very good ideas. Not baby blankets, surely. Textiles need to be more than what everyone thinks they are. Also, your weeds were intentional--you could have pulled them out.

A while back you made a project, my favorite, before this suit, your rya signal flag. Was it Man Overboard?

Popular posts from this blog

Screw print 1.1

First in a series of screw tests. I'm designing a 3D printed loom and am documenting the design process. I have already come up with the preliminary shape of the thing, but shall keep that under wraps until I'm ready to launch. I am currently attempting to make a 3D printed screw for operating the hinge. Currently the loom is designed with a 20mm wide screw and screw hole so I am working from this for the time being. The parameters I shall initially be varying are the thread size and the clearance (push). I have had good results printing a slot-together joint with a push of 0.125 so shall start from there. Standard dimensions will remain the same throughout all variations of 1.x, specific dimensions will be changed according to the results. Print setting will most likely stay the same, at least until I start narrowing down on Specific Parameters and feel perhaps the printing quality needs to be improved. Standard dimensions thread size 20 x 20mm Spec...

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the ...

3D printed folding loom Version 1

Hey there! Been wanting to talk about this for aaaaaaaages. But by god does designing medium scale 3D printed objects take a long time. Anyhow, I've been designing this thing since maybe August and been printing since late October. Here's a couple of pictures of it open. I'm just freehanding that pattern. I kind of fluffed up the last two switchovers. And it was meant to be a knotwork but it clearly isn't. I really need to learn to draft things out before weaving them, I'm not good enough at sketching. Same thing on paper actually, I can draw stuff in front of me (to an extent) but I can't sketch from my head. Anyhow, here's a couple of pictures of the thing closed up. Boom! So, that's nice. I'm quite happy with the progress so far. Now, onto the issues. The big circles that form the hinge get in the way of my hands when i'm weaving and I'm always bumping my knuckles off them. Would probably work better for rigi...