Skip to main content

end of year exhibition

i got bored when i was in the country. this is what i did for the 3D sculpture part of visual studies

the front piece is a warp of plastic fishing line, which is tough enough to handle a weft of bramble and gorse stalks. for those not familiar with gorse, it's prickly as hell and almost impossible to weave with. you really need a shed about 20 cm deep to expect to not be snagging warp threads while using it. the warp was a chaotic mess by the time i'd finished using the gorse, the brambles were very little trouble on the other hand

and this is a flower, think i had a picture up of this in unpainted state a while back. as you can see it's made out of gardening wire and masking tape




the tutors thought the straw hanging all over it was intentional, something to do with the interface between nature and artifice. the truth is i ripped the wire out of a tangle of weeds.

the suit is sort of an idea i had for aggressive textiles. textiles that harm rather than heal, y'know. the next thing i'm wanting to work with is razor wire, but it's quite expensive (about £44 for a 10 metre roll, and i think you might need a special license), so i might settle for barbed wire for the time being. it's completely frivolous of course, and has no practical applications. it occured to me you could wear sharp stuff to demonstrations and the police wouldn't be able to grab a hold of you, but then you'd hurt innocent passers-by and fellow protestors, rather self-defeating. fetish-wierdos might go for it, but i don't want to get into that market

just a bit of fun really. surprisingly enough you can actually run in that suit.

Comments

Meg said…
You CAN run in it? Yes, it is surprising! What next for you - what are your summer plans and where are you going to do it in?
2 June 2010 at 20:59
Andrew Kieran said…
sadly enough i'm just looking for work. in thurso, of all places

what a sorry state of affairs eh? gotta go back round the hotels again, competing for KP work with bloody children
2 June 2010 at 23:39
Trapunto said…
The outline reminds me a bit of samurai armor. I really like the way the petal shapes look, painted.
3 June 2010 at 19:14
Avalanche Looms / Susan Johnson said…
Razor wire? Aggressive textiles. Edgy ideas, and very good ideas. Not baby blankets, surely. Textiles need to be more than what everyone thinks they are. Also, your weeds were intentional--you could have pulled them out.

A while back you made a project, my favorite, before this suit, your rya signal flag. Was it Man Overboard?
19 July 2010 at 18:02
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif
2 comments
Read more

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the
3 comments
Read more