Skip to main content

all done

almost

just finished my last final woven bit on the looms at college. that's 8 technical samples and 5 final samples (usin colours from pictures i pulled off the web, cos i use the web to do pretty much all my research and imagery scavenging)

all the samples are based on natural stuff that happens in nature. in order - 1 dying star, 1 lake with hills in front, 1 bunch of trees in summer, 1 largest/coldest large-sun-sized-but-really-cold object as seen through hubble telescope (discovered the other month), 1 rocky/heathery hillside somewhere up north presumably with the purple heather and all that jazz and 1 big green nebula thing with all bits of orange and some pale blue in it

i particularly like the hubble stuff. gas nebulas rock

the fabrics should be getting cut off the looms tomorrow evening, and i'll have to do yarn wraps and weft plans. of course, not having written the weft plans down while i was weaving, i now have to painstakingly look at the fabrics to figure out exactly what weft i used when. luckily, i'm a stickler for regularity and symmetry in stripes, so it shouldn't be too difficult, and i only have to do the weft plan for the 6 final samples, not the technicals. still, a bit of foresight and i could've had the whole thing finished by tomorrow lunchtime.

i'll post up some piccies (actually, probably a whole rake of piccies, or i could just post the finals, cos the technicals really aren't that interesting)

drafts will be posted only on demand, cos they're A4 sheets and i really can't be bothered pissing about in OpenOffice (subtle plug for open source software there) for hours remaking them. you might find them a little confusing, cos they use a slightly different notation system from what most of you will be used to, being dobby and all. i still ain't 100% sure i understand them perfectly well.

still, i'm working on it

Comments

Anonymous said…
Hiya
Would love to see the pics. Can't wait.
Best wishes
Trapunto said…
Yes, looking forward to the pictures. I'd be interested to see what a dobby draft looks like, but don't remake it! What about a scan of the A4 sheet?
Susan said…
I'm glad you learned so much, but hope you aren't too efficient to weave great stuff: I'm still a great fan of your project ideas like the rya signal flags, and the warp along the breakwater.

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the