Skip to main content
Found this video online. Just randomly. Check out the way she swaps the cards around, about 30 seconds into the video. Can't believe I never thought of that. Don't know what language this is. Also, I love those cards.


Comments

Dorothy said…
Google translate identifies the comments as being in Russian. I love those clear acrylic cards and being able to see the threads running through them. No shuttle, no beater, very simple way of working and a beautiful braid! Thanks.
25 July 2014 at 21:54
Dorothy said…
Google translate identifies the comments as being in Russian. I love those clear acrylic cards and being able to see the threads running through them. No shuttle, no beater, very simple way of working and a beautiful braid! Thanks.
25 July 2014 at 22:18
Meg said…
I love those clear plastic cards, too, though I still don't understand the logic of card weaving. But then I was mesmerized by what I thought was a blue and black cushion/upholstery fabric, which moved!!! Gee, it was someone's skirt! Still love it.
26 July 2014 at 05:45
Cally said…
It is indeed Russian. And I want acrylic cards too now!
26 July 2014 at 18:47
Andrew Kieran said…
Well, I'm looking into it. Acrylic can be brittle, so I may try getting some done in Polypropylene as well.
27 July 2014 at 13:41
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif
2 comments
Read more

Building a jack loom Part 1: Vague plans and messy diagrams

I've been thinking about it for a while to be fair. What I'm thinking about is an 8 shaft folding jack loom. The interesting part comes when I point out that I'm going to build an electric dobby controller into the bottom of it so it operates from one pedal and a computer program. So far I've been thinking and thinking and I'm basically roughly copying the kind of frame you'd find in a Siever's school or Baby wolf loom. Basically it's like an X that folds up on itself with the castle in the middle. Should be able to reduce it's depth from 3 feet to about 1 for storage. I don't think it's really that difficult to design the loom frame, aside from building the beams and making the ratchets and so on, which I may just jigsaw out of thick MDF. I have most of the wood I need asides from some panelling and I need to buy some aluminium sheet to make the shaft dividers with and also to hold the shaft bodies together with. The rising levers w
5 comments
Read more