Skip to main content

Twisted Band

There are two seperate packs of 20 cards here, each working independently and then together.

The left hand pack is threaded in the Z direction, the right hand pack is threaded S. If you weave them together they form a chevron. If you weave them seperately they form two different twisted bands.

So, here I wove them together for a but, then seperated them and wove each pack seperately for 40 picks. I then allowed them to follow their natural twist and added a little extra in, by turning the band over in their desired direction, cards and all by 360 degrees.

Then weave them together again for a bit.

And you get this interesting effect. Which is interesting
Labels:

Comments

Peg in South Carolina said…
I have been getting 5-10 spam comments on your blog for 3 or 4 days now. I hope you reconsider the word verification.
12 November 2012 at 01:09
Andrew Kieran said…
huh, that's weird. I do apologise. Do you mean the word verification isn't working for you or you're getting stuck in the spam filter? Either way, I'll take it off. I must admit, captcha's are getting more difficult
12 November 2012 at 21:34
Andrew Kieran said…
Ok, I think I get it. There is a lot of stuff in my spam filter, I don't know if any of it's from you. Either way I've reinstated word verification and moderation.

Darn bots
12 November 2012 at 21:39
Andrew Kieran said…
oooooh, i see what's happened. You've commented on one of my old mildly popular posts and clicked the "notify me by email" box and now you're getting bombarded with gibberish before the spam filter gets it. Ok.
12 November 2012 at 21:47
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif
2 comments
Read more

Building a jack loom Part 1: Vague plans and messy diagrams

I've been thinking about it for a while to be fair. What I'm thinking about is an 8 shaft folding jack loom. The interesting part comes when I point out that I'm going to build an electric dobby controller into the bottom of it so it operates from one pedal and a computer program. So far I've been thinking and thinking and I'm basically roughly copying the kind of frame you'd find in a Siever's school or Baby wolf loom. Basically it's like an X that folds up on itself with the castle in the middle. Should be able to reduce it's depth from 3 feet to about 1 for storage. I don't think it's really that difficult to design the loom frame, aside from building the beams and making the ratchets and so on, which I may just jigsaw out of thick MDF. I have most of the wood I need asides from some panelling and I need to buy some aluminium sheet to make the shaft dividers with and also to hold the shaft bodies together with. The rising levers w
5 comments
Read more