Skip to main content

Shuttles


So, this is the picture from ebay. i bought this shuttle, and i won't tell you how much i paid for it. it's described as "vintage", which i doubt greatly, and has a "diamond wood" mark on the bottom of it as well as the letters "USA", which gives a clue to it's origin. which is funny, because i bought it from someone in lancashire, which was one of the main areas where the textile industry of britain was concentrated, back in Ye Olde Times.

I've looked up Diamond Wood on the internet, and apparently it comes from China and is really rather dense, thus earning it's name. this shuttle however apears to be made of two types of wood, making it a compound shuttle. Genghis Khan conquered half of Eurasia with the compound bow, what can i do with a compound shuttle i wonder?

Now, as you may notice, there is no pin for putting the pirn on, which you'd think would be essential. these things usually pivot on a hinge or something and are fixed in place. not here. no, it jams in at the end, there's a wax mould fitted in the end with the slot for jamming the butt of the pin into. Now, i'll have to make one. hmm, woodworking skills? i don't have many. oh well.


also, i also got a little stainless steel shuttle. after i bid for it, it occurred to me that a stainless steel shuttle might be a little too heavy, but i didn't bother thinking about it too much. anyway, i got it, and it's 3 inches long. it is soo cute. i'm going to hang it on a cord and wear it round my neck like a christian would a cross.

i don't have my camera with me today, so i can't show you.

this is also a good time to point out that i have been buying up used shuttles, mostly end-feed shuttles from old mills. I shall be restoring these and selling them. I have been developing also a line of scarves that i can sell at a reasonable price to the masses. Watch this space. Watch, indeed, for the launch of Humble Woven Products, your solution for reasonably priced handwoven scarves and restored vintage end-feed shuttles.

No, really, I've bought the labels and everything. Exciting eh?

Comments

bspinner said…
Interesting shuttle. Good luck on your new business. And yes it is exciting.
23 February 2009 at 18:09
Anonymous said…
Way exciting!! "Compound shuttle" made me laugh. Sounds like your stainless steel one would make quite a projectile weapon though. Yesterday I read that King Gustav of Sweden was assassinated by a pistol loaded with rusty nails. Somebody wrote an opera about it. He's the one they named the furniture after.
4 March 2009 at 16:15
Andrew Kieran said…
the stainless steel shuttle is just over an inch long. it's cute. i'm thinking of turning it into a neckpiece or something.

some of those old shuttles would make excellent clubs it has to be said. i have one chunky thing that you can't get a hand around. and it's as long as my arm. there's quite a weight in that. the thing that's really nasty is they've all got metal points on the ends. i don't know if you're familiar with reclaimed industrial shuttles, but they all have metal noses. wouldn't like to get attacked by a shuttle wielding maniac in a dark alley, oh no
5 March 2009 at 01:03
Anonymous said…
Diamondwood came up on a search I did a few years ago. Apparently, it's wood dust mixed with plastic glue and very strong, but a compressed composite rather than from a certain tree. If you can find a pirn to fit your end-feed shuttle, you'll find it lovely to use: great selvedges!
6 March 2009 at 16:33
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif
2 comments
Read more

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the
3 comments
Read more