Skip to main content

back to basics






my house is almost empty now.

i have no looms. so i'm weaving on a frame.

you could say i've got piles. knotted piles. sounds painful doesn't it?

i'm practicing on the little frame before i make something on the big frame. i want to make a big square piece out of two length sewn together, for sitting around on the ground on.

i haven't done any weaving for a while and it's nice to do something simple, with equipment that anybody can get hold of. i won't be able to keep a loom in my new house cos it's tiny, so i have to learn how to weave this way. i think one could make quite substantial rugs by sewing strips together. we'll see.

-andrew

Comments

Anonymous said…
Whoah, did I miss something? No looms as in sold, or in storage elsewhere?
20 June 2009 at 22:43
humblebumble said…
in storage. my loom's in my parents' house n shed, the small floor loom's gone to castletown heritage centre, where it'll get some use, and the table loom's gone to a beginner weaver out west

i'm moving into a matchbox see?

not to worry, there's plenty of looms at college :)
21 June 2009 at 18:41
Dorothy said…
Not even space for a folding table loom that would go under a bed?

Actually frame looms are great, but backstrap possibly even better as I understand you can roll up the loom and your weaving. Inkle looms are also very nifty.

Just wondering if you are going to have tension problems on that frame? I've set up a frame to weave where I lashed the warp around a stick that was separately lashed to the top of the frame, so I can adjust the lashing to the frame if the warp gets too tight.

Very best wishes for a happy time in The Matchbox. small places can be cosy and you don't loose things so easily when everything is in reach. As a kid my bedroom was just about 6 feet square and it was fine. A folding table attached to one wall helped to make good use of the space.

I'm starting to feel excited about your college course, I guess it's not long to September now. Shall stop babbling now and put myself away for the night...
21 June 2009 at 23:01
Meg said…
Show us what you weave on the frame. My mom loves frames, but I'm not sure if she loves weaving on them or making small frame looms more!
22 June 2009 at 03:28
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the
4 comments
Read more

treble-cloth construction

I am currently in the process of designing a triple layered fabric. One layer shall carry conductive warp threads (one out of every three), another layer shall carry conductive weft threads (again, one out of every three) and a third layer shall lay between them and act as an insulator, keeping them apart and preventing unwanted contact between the two conductive layers. Constructing a treble cloth is a compicated process. The way that a treble cloth is woven is that first the face cloth is woven, then the centre cloth is woven, then the back cloth is woven. This is a draft for a treble cloth. The crosses indicate weaving marks for the cloth currently being woven, the dashes are lifts and are used to indicate shafts that are being lifted in the case of layers that are above the layer currently being woven. Blue is back, Red is front, Green is centre (All three layers are plain weave btw) The cloth is constructed like so 1: Back cloth is woven. All red and green marks are lif
2 comments
Read more

The curse of the faulty rachet-stop + The contractual obligation video post

I got the warp wound on the medium sized loom last week, and threaded and sleyed it this weekend Now. The back beam is held by a ratchet. and the ratchet-stop is a plate of metal which is pulled up from the ratchet-wheel with a handle attached to the main upright. It seems that somewhere along the line of the last couple of weeks i must have bent the plate back a little cos it no longer holds tight against the wheel. i've tried holding it down with a piece of cord wrapped round the beam, but it's not having it and i've had the whole thing come loose while swinging the batten twice already. I've tried to remove the plate but one of the screws is held tight. I'm going to have to take it outside and hammer it flat on the doorstep. This is aggravating On another aggravating note, the shuttle keeps flying out of the race and hitting the wall when i beat from the left hand side on the larger loom and i can't figure out why, cos i haven't changed anything from the
3 comments
Read more