Skip to main content

500 heddles

It's finally done.

I've made all the heddles i think i really need for the castletown loom, and i'm going to go in and warp it up on saturday. or maybe friday. friday might be better now i come to think of it.

anyway, i got some yarn for to put on the loom. a navy blue plain yarn, probably something like 28 worsted count i guess, and also a brown and white sorta flecky nep yarn. i think that's the right term, i really should know these things by heart now.

anyway, i'm going to warp it up at 20epi or so with blue predominating in a sort of tartan check. so, my rough calculations go like this:

500/20 = (5/2=2.5x10=25) 25"

or just over 2 feet. allowing for draw-in it could end up being exactly 2 feet wide, which is quite a nice width for a scarf. so i guess i'll make a 5 metre warp with that and get 4 scarves out of it if all goes well

anyway, that's that. making 500 heddles is no joke.

-andrew

Comments

Meg said…
Well done, you! And your descriptions suits me just fine. I get the picture.
12 July 2010 at 23:27
Andrew Kieran said…
my camera's still broken. i need to buy a set of tiny screwdrivers. and i always took lousy pictures anyway, me owning that phone is like the writers coronation street owning pens and word processors.

could be put to better use ;)

anyway, i've inherited my dad's old camera. i just haven't charged the batteries for it yet. it's smaller and can fit in my coat pocket without breaking, so it's all good
13 July 2010 at 01:07
Trapunto said…
What a job. Did you figure out how long it took you to tie each heddle, and multiply by 500? I always like to do that after a monotonous chore. I'm not sure whether knowing total time spent increases or decreases my sense of accomplishment.
13 July 2010 at 16:11
Andrew Kieran said…
nah. i did it in front of the telly in the evening. i guess it's not important, cos it's something you only have to do once for each loom.

also, timing the making of an individual heddle and multiplying by 500 would give an inaccurate result, as the time taken to make each heddle could vary by a second or two, and over 500 that'd skew your results quite significantly.

also, i was cutting the length up first, and then tying them (division of labour, innit), so i don't think i could reliably time the time

the better thing to do would be to time the making of the whole set and divide the time by 500, thus arriving at the average time it takes to make a heddle.

it remains to be seen whether i can put together a warping stand (i've got the frame) and warp a loom in one day though.
13 July 2010 at 22:32
DEEP END OF THE LOOM said…
that's is quite a bit of work, good on you!!! I can't wait to see what your first project will be.
14 July 2010 at 19:04
Dorothy said…
Hope your weaving with the flecky nep yarn is going well, great description I'm sure it's more use to me than a "name" for the yarn. You must be a fast knotter after 500 heddles.
17 July 2010 at 18:42
Post a Comment

Popular posts from this blog

Tablet Weaving Lesson #1: Backstrap weaving a simple diamond motif

This is the first in a series of video and photo tutorials showing basic to advanced tablet-weaving concepts. These lessons shall each build on the last and hopefully take the viewer from simple diamond patterns up to more complicated double face pattern weaving with finer yarns and eventually onto the heady heights of brocading and other fancy techniques (just as soon as I learn how to do them myself). In this first lesson we'll learn the basic weaving steps involved in weaving a diamond pattern in the backstrap style. This lesson is meant for someone who has purchased a ready-made warp from me. The next lesson shall detail how to design and make this warp oneself. And we begin This is the basic pattern we are making. The woven band is tied to my waist with another strap. I am holding a small stick shuttle in my right hand which contains the weft. In front of me are the cards, each card has 4 warp threads going through it. The gap that you can see is called the ...
4 comments
Read more

24 shaft patterns - all the fun

 Yo-Yo-Yo! 24-shaft weavin in the house yo! i think that's enough pretend hip-hop talk for now, eh? so yeah, here are three of the more successful results of my cotton warp on 24 shafts. i am really beginning to envy the 3rd and 4th years working on compu-dobby systems now. you spend 2 hours weaving and 2 hours making a peg plan, and it hurt my back putting little pegs into little holes. and of course all the little pegs and the little holes are almost imperceptibly different sizes, so not all pegs fit all holes, and sometimes you have to stuff wee bits of yarn in as well to get them to stay. and then sometimes they're not far in enough and they jam the dobby mechanism, and sometimes they're too far in and they jame the dobby mechanism. and sometimes a link breaks and the whole mechanism jams. and sometimes all the shafts lift at once and you can't figure out why. and sometimes shafts just bounce off their strings and you can't figure out why, ...
5 comments
Read more

Building a jack loom Part 1: Vague plans and messy diagrams

I've been thinking about it for a while to be fair. What I'm thinking about is an 8 shaft folding jack loom. The interesting part comes when I point out that I'm going to build an electric dobby controller into the bottom of it so it operates from one pedal and a computer program. So far I've been thinking and thinking and I'm basically roughly copying the kind of frame you'd find in a Siever's school or Baby wolf loom. Basically it's like an X that folds up on itself with the castle in the middle. Should be able to reduce it's depth from 3 feet to about 1 for storage. I don't think it's really that difficult to design the loom frame, aside from building the beams and making the ratchets and so on, which I may just jigsaw out of thick MDF. I have most of the wood I need asides from some panelling and I need to buy some aluminium sheet to make the shaft dividers with and also to hold the shaft bodies together with. The rising levers w...
5 comments
Read more